Introduction: When Customer Feedback Points to a Product Problem
A pet diaper may look simple. But when a product slips during a walk, leaks around the legs, or comes loose after a few minutes of activity, the problem is rarely just one material.
One customer told us: “My dog walked three steps and the diaper was already around his back legs. The fit just wasn't there.”
Another said: “We tried three different brands. They all leaked from the legs within an hour.”
For pet hygiene brands, these issues can quickly become product complaints, poor reviews, and repeat-purchase problems.
That was exactly the challenge one of Elintree's long-term customers wanted to solve.
The customer had been working with Elintree for nearly three years. During an international trade exhibition in Brazil, they came to our booth with a collection of customer feedback highlighting several recurring problems:
-
The diaper slipped during activity
-
Leakage occurred around the legs
-
The fastening system was not secure enough
-
The overall fit was not stable across different body shapes
The customer wasn't simply looking for a new diaper. They needed a better-performing product.
So instead of changing one material and keeping the rest of the structure unchanged, Elintree analyzed the product layer by layer and redesigned the key components around the actual problems.
This is the story of how customer feedback became a structured product upgrade.

The Challenge: Three Product Problems Affecting Everyday Performance
After reviewing the customer's feedback and evaluating the existing product structure, we identified three major performance areas that needed improvement.
1. Poor Fit and Diaper Slippage
The existing diaper did not maintain a stable fit during movement. When pets walked, sat, lay down, or became more active, the diaper could shift out of position.
For a pet diaper, fit is more than a comfort issue. Once the diaper moves away from the intended position, both leakage protection and fastening performance can be affected.
Key challenge:
-
Insufficient body conformity
-
Movement-related shifting
-
Unstable positioning on different body shapes
2. Insufficient Leg Sealing and Side Leakage
The second major issue was leakage around the legs. When a pet moves, the leg area is constantly changing shape. If the leak barrier cannot maintain sufficient contact with the body, gaps can form and liquid can escape.
The existing structure needed better protection around the leg openings without making the diaper unnecessarily rigid or uncomfortable.
Key challenge:
-
Limited barrier protection
-
Gaps during movement
-
Increased risk of side leakage
3. Weak Fastening and Closure Stability
The fastening system was another recurring source of complaints. If the closure does not maintain sufficient grip during movement, the diaper can gradually loosen and shift.
This creates a chain reaction:
Weak fastening → diaper movement → poor fit → increased leakage risk
The solution therefore needed to improve not only fastening strength, but also the overall interaction between the fastening system and diaper structure.
Root Cause Analysis: The Problem Was Structural, Not Just Material-Based
One of the most important findings from this project was that replacing a single material would not fully solve the customer's problems.
The three major complaints were interconnected.
Poor fit affected positioning.
Poor positioning affected the leg seal.
Weak fastening increased the likelihood of shifting.
Therefore, Elintree approached the project as a structural optimization, rather than a simple material replacement.
We evaluated the interaction between:
-
Topsheet
-
Absorbent core
-
Fastening system
-
Leak guards
-
Backsheet
-
Elastic components
-
Overall diaper shape
Evaluation method: We tested each component in isolation using standardized lab methods, then assessed how they performed together in simulated movement conditions. For example, we measured topsheet liquid strike-through separately, but also tested the complete diaper on a pet mannequin under walking and lying-down conditions to understand how fit and leakage interacted.
What we found: The fastening system was the critical bottleneck. Even with good materials, the diaper would shift during activity, which then caused the leg seal to break. This insight shaped the entire upgrade strategy.
The objective was simple: make each component work together to create a more stable, comfortable, and reliable pet diaper.

The Solution: Five Targeted Product Upgrades
Instead of making one isolated change, Elintree redesigned five key areas of the product.
1. Spunbond Hydrophilic Nonwoven Topsheet — Faster Liquid Penetration with a Softer Surface
The topsheet is the layer that comes into direct contact with the pet's skin, so its performance affects both comfort and liquid management.
Elintree evaluated different topsheet configurations and selected spunbond hydrophilic nonwoven for this project.
The material was selected for its balance of:
-
Softness
-
Liquid penetration
-
Surface dryness
-
Manufacturing efficiency
The hydrophilic treatment helps liquid pass through the topsheet and into the absorbent structure instead of remaining on the surface.
Designed to improve:
-
✓ Surface comfort
-
✓ Liquid penetration
-
✓ Wearing experience
2. Tissue-Wrapped Core with Fluff Pulp and SAP — Improving Absorption and Liquid Retention
The absorbent core was redesigned using a tissue-wrapped structure combining fluff pulp and SAP.
The objective was not simply to increase the amount of absorbent material, but to improve how liquid is distributed, absorbed, and retained inside the core.
The optimized structure helps:
-
Distribute liquid more effectively
-
Improve absorption efficiency
-
Increase liquid retention
-
Reduce the risk of localized saturation
Internal Testing Result
Compared with the original configuration, the optimized core showed approximately 30% improvement in liquid retention under the project's internal test conditions.
Test conditions: The test was conducted using a standardized liquid pour method (150ml per pour, 3 pours over 15 minutes) followed by a 2‑minute absorption period. Liquid retention was measured by weighing the core after a 5‑minute drainage period. The test was repeated 10 times per configuration to ensure consistency.
This demonstrates an important principle in absorbent product development:
Absorption performance depends on the interaction between SAP, pulp, liquid distribution, and overall core structure—not simply on the amount of SAP used.
3. Upgraded Hook & Loop Fastening System — More Secure Closure During Movement
Because fastening stability was one of the customer's main complaints, Elintree upgraded the closure system to a white hook-and-loop fastening system with improved grip and durability.
The fastening system was evaluated through pull testing.
Pull-Test Result
The upgraded fastening system demonstrated approximately 40% higher closure strength than the original design under the project's test conditions.
Test conditions: Pull tests were conducted using a digital force gauge with the fastening system applied to the diaper's target landing zone. The hook was pulled at a 180‑degree angle at a speed of 100mm/min. Each configuration was tested 10 times. The 40% improvement represents the average peak force across all tests.
The stronger closure helps the diaper remain securely positioned during common activities such as:
-
Walking
-
Sitting
-
Lying down
-
Moderate movement
For OEM customers, this type of upgrade is particularly important because fastening performance directly influences the user's perception of product quality.
4. 3D Leak Guard with SMMS Spunbond — Better Side Leakage Protection
To address leakage around the legs, Elintree added a 3D leak guard structure using SMMS spunbond material.
The three-dimensional barrier creates additional separation between the liquid and the edge of the diaper while allowing the leg area to remain flexible.
Combined with the overall body-contoured design, the structure helps maintain better contact around the leg opening during movement.
Designed to improve:
-
✓ Side leakage protection
-
✓ Leg-area conformity
-
✓ Movement stability
-
✓ Wearing comfort
5. Composite Backsheet with 2-Color Printing — Leak Protection Meets Brand Customization
The backsheet serves two purposes: protecting against liquid penetration and providing an important surface for brand presentation.
For this project, Elintree used a composite backsheet for leak protection and incorporated 2-color printing for customized branding.
This allowed the customer to achieve both functional performance and a more differentiated OEM appearance.
For private label brands, this is particularly valuable because product structure and visual identity can be developed together rather than treated as separate projects.
Product Structure: Before vs. After
The product upgrade was not based on one isolated component. The key changes were integrated across the diaper structure:
| Area | Original Product | Optimized Product |
|---|---|---|
| Topsheet | Standard structure | Hydrophilic spunbond nonwoven |
| Absorbent Core | Original pulp + SAP structure | Optimized tissue-wrapped pulp + SAP core |
| Fastening | Original closure | Upgraded hook & loop |
| Leg Protection | Limited barrier structure | 3D leak guard |
| Backsheet | Standard backsheet | Composite backsheet |
| Branding | Limited customization | 2-color printing |
From Customer Feedback to Product Upgrade
Elintree followed a structured development process:
Step 1: Collect Market Feedback
We reviewed actual customer complaints and identified recurring performance problems.
↓
Step 2: Analyze the Existing Structure
Instead of immediately replacing materials, we evaluated the relationship between fit, fastening, leakage protection, and absorbency.
↓
Step 3: Develop Multiple Configurations
Different material and structural combinations were evaluated according to the specific product requirements.
↓
Step 4: Test and Compare
Key performance areas were tested and compared with the original configuration.
↓
Step 5: Finalize the Product
The most suitable combination was selected for the customer's target market and production requirements.
This approach allows OEM development to move beyond "Which material is better?" to "Which combination of materials and structures solves the actual product problem?"
What the Upgrade Means for the Customer
The final product addressed the customer's main concerns across five areas:
Better Fit
A more structured body-contoured design helps the diaper remain in position during movement.
Stronger Fastening
The upgraded hook-and-loop system improves closure stability.
Enhanced Leak Protection
The 3D leak guard provides additional protection around the legs.
Better Absorption and Retention
The optimized pulp and SAP core improves liquid distribution and retention.
Customized Brand Presentation
The composite backsheet supports 2-color printing for private label branding.
Together, these improvements create a more complete product solution rather than a single-feature upgrade.
What This Project Taught Us About Pet Diaper Development
One of the most important lessons from this project is that better performance does not always come from using more expensive materials.
A product can use high-quality materials and still perform poorly if the components are not properly matched.
In this project, the biggest improvements came from understanding how different components interact:
Fit + Fastening + Leak Guard + Absorbent Core + Backsheet
When these elements are designed as one system, the final product can perform much more reliably than when each component is optimized independently.
For brands developing or upgrading pet hygiene products, this is an important consideration when evaluating an OEM manufacturer.
You are not only choosing a factory. You are choosing a partner that can help identify why the product is underperforming and what needs to change.
Frequently Asked Questions
Q1: What is the best material for a pet diaper topsheet?
There is no single material that is best for every pet diaper. Hydrophilic spunbond nonwoven is one option because it can provide a balance of softness, liquid penetration, and surface comfort. Material selection should be based on the product structure and target application.
Q2: How can pet diapers be prevented from slipping?
Stable fit usually depends on several factors working together, including body-contoured design, fastening strength, elastic performance, and appropriate sizing. Improving only one component may not fully solve slippage.
Q3: How can pet diaper side leakage be reduced?
A properly designed 3D leak guard, suitable leg opening geometry, elastic performance, and correct sizing can work together to improve side leakage protection.
Q4: Can Elintree customize pet diapers with our brand?
Yes. Elintree supports OEM/ODM pet hygiene product development, including product structure, materials, fastening systems, backsheet printing, and packaging customization.
Q5: Can Elintree develop a pet diaper based on an existing product?
Yes. Existing products can be evaluated based on specific customer complaints and performance requirements. The development process can then focus on targeted structural and material improvements.
Looking for a Pet Diaper Manufacturer That Understands Performance?
If your pet diaper is receiving complaints about:
-
Slipping during activity
-
Leakage around the legs
-
Weak fastening
-
Poor fit
Elintree can help you diagnose the problem and develop a better solution.
What we offer:
-
Product structure evaluation
-
Absorbent core optimization
-
Fastening system upgrade
-
Leak guard design
-
Private label and customization
📧 Contact our OEM team – sales@elintree.com
💬 WhatsApp – +86 153 5927 3309
📦 Request free samples – Test our adult diaper quality yourself.
📦 Request a product review – Send us your current pet diaper for a free performance evaluation.
Have a pet diaper that isn't performing as expected? Let's identify the problem, evaluate the structure, and develop a solution together.

Home
